FAQ of Re-usable Incontinence Pants

 

Q. Will I need a waterproof cover?

A. No. The wet zone in Dry N Free Re-usable Incontinence Pants has a waterproof layer. It is a high quality polyurethane laminate (PUL) which is waterproof, yet breathable. Our fabric is custom made to provide a soft, breathable and waterproof barrier.
 
The built in lining is made from high quality microfleece. It keeps your skin feeling dry.

 

Q. Are they hot?

A. No. Our fabrics are breathable, making them cool and comfortable. 
 
 

Q. Are they unisex?

 
A. Yes, Dry N Free pants and liners can be used by men and women.
 
 

Q. Should I wash Dry N Free prior to use?

A. Yes. This will remove manufacturing residue. We recommend pre-washing the absorbent inserts several times to enhance performance.

 

Q. What are Absorbers made from?

A. Our absorbers are made with a super absorbent blend of bamboo/cotton. A renewable resource, Bamboo has natural antibacterial  antifungal properties.
 
 

Q. Why are my Dry N Free pants leaking?

A. Assuming you have the correct size (creating a snug seal around legs and tummy), Dry N Free pants should work well.

The most common reasons for leakage are:

  1. Too much detergent in the wash. Washing with too much detergent leaves a residue on clothing. This residue will hinder the performance of the inner lining (cause it to repel liquid). To avoid this, use half (or less) the recommended amount of detergent in each wash. This is more than enough to clean them properly; and
  2. Not enough pre-washing of the absorbent insert. The absorbers can take several washes to reach their full potential.

 

Q. The lining on my pants continues to repel liquid and cause leaks, what can I do?

A. If you find your pants are constantly leaking and liquid simply isn't making it through to the absorbent insert, the problem is usually due to a build up of detergent on the inner lining. A good way to clean this off and refresh your pants is to follow these steps:

  1. Wash your Dry N Free pants using a hot machine wash (no detergent)
  2. Wash again in a hot machine wash, this time use half strength detergent
  3. Cold rinse
  4. If bubbles remain in step 3's rinse, run another rinse
  5. Line or tumble dry (on low)

 

Q. Which detergent should I use?

Any normal detergent is fine. Remember to use only 1/2 the recommended strength for the size load you are washing.

Our preferred detergent is Planet Ark/Aware (New Zealand - Eco Store or Amolin are good choices). Do not use clear or natural soap products as they can leave an oily film on the lining and hinder absorption. Do not use fabric softener.

 

The FAQ contents and trade mark belong to Dry N Free

Back to our home page www.homecareproducts.com.au